It’s Wintertime. The weather outside may be frightful, but everything will be fine because you’ve got a heating system to keep your home cozy and warm. You get up from your couch, walk over to the thermostat, crank up the dial…

And that’s when you find out your heat won’t turn on.

This situation is the literal stuff of nightmares. No one wants to stay holed up in a cold house, and you need to have your heating unit back in working condition ASAP. Before you whip out the phone and call for repair services, you might want to try to figure out why the heater won’t turn on so you can get to the root of the problem.

With that said, here are a few of the most common reasons why your heating system isn’t working. Read on to find out more!

Heat Won’t Turn on? Check Your Circuit Breaker

One of the first things that you’ll want to look at if your heat isn’t working is your circuit breaker. Your circuit breaker is the mechanism that protects you if your electrical current goes over the circuit limit by shutting the whole current down. This usually happens if the wiring is old or faulty, or if you have too many items plugged into that specific circuit. Contact a professional to find out what the case may be.

Make Sure Your Furnace Is Turned on

It’s not uncommon for people to turn off their furnaces during the summer periods; after all, why have it on if you aren’t using it? That being the case, you may have simply forgotten to flip the switch to kick the unit back into gear. Have a look at your furnace to see if that’s the case, then make sure to do a maintenance check so it’s ready for the cold months to come.

Check Out Your Heat Exchanger

A problem with the heat exchanger isn’t common, but when it happens you need to have it taken care of as soon as possible – especially if it’s a cracked exchanger. Even though cracked heat exchangers don’t tend to cause any immediate problems, they can eventually impact the efficiency of your system, and even worse, the carbon monoxide can impact your health. Call up a professional to handle the problem.

Get Your Ductwork Checked Out

Sometimes, the problem lies not with your heater, but with your ductwork. If your duct isn’t installed or functioning properly, it could easily affect your heater’s ability to carry out any heating tasks. Have your ductwork inspected to make sure it’s up to par and can keep your house warm.

Let’s Get You Warmed Up

Finding out why your heat won’t turn on is only half of the battle. The next step is finding out where to go to get the professional services you need to get the job done right. Luckily for you, you won’t have to look any further.

At Williams Services Company, we know all of the ins and outs of HVAC repair. We cover a wide range of repair services, including repairs for air conditioning, oil burners central heat pumps, gas hot water heaters, HVAC ductwork, and so much more.

Ready to get started? Make sure to take a look through our site to see what types of services we have to offer you. Let’s turn your cold house back into a cozy home!